Effect of Thermal Variances on Flexible Pavements
1Directorate of Works and Services, Joseph Sarwuan Tarka University, Makurdi, Nigeria
2Department of Civil Engineering, Joseph Sarwuan Tarka University, Makurdi, Nigeria
3Department of Civil and Environmental Engineering, Air Force Institute of Technology, Kaduna State, Nigeria
Journal of Sustainable Construction Materials and Technologies 2022, Vol. 7, Issue 3, pp. 4; doi.org/10.47481/jscmt.1136848
Abstract
This article presents recent findings on the effect of thermal variances on pavements. The study presents findings from different researchers and groups across the globe. The study covers temperature measurement in asphalt pavement, history of asphalt pavement temperature prediction models, determination of asphalt layer depth temperature, main factors contributing to temperature variations of asphaltic pavement, energy balance in flexible pavements, asphalt pavement design incorporating the temperature factor, the effect of temperature on the structural performance of asphalt pavement climate and environmental factors. Summarily, the study deduced that temperature has a reasonably substantial effect on the asphalt pavement layer's mechanical and physical material characteristics.
Keywords: Thermal; effect; seasonal; pavements; asphalt; temperature.
References
- Abaza, K. A. (2011). Stochastic approach for design co-Fernández, E., Vega-Zamanillo, Á., & Montene- of flexible pavement. Road Materials and Pavement gro-Cooper, J. M. (2020). Laboratory assessment of Design, 12(3), 663–685. [CrossRef] water permeability loss of Geotextiles due to their
- Adwan, I., Milad, A., Memon, Z. A., Widyatmoko, installation in pervious pavements. Water, 12(5), I., Ahmat Zanuri, N., Memon, N. A., & Yusoff, N. Article 1473. [CrossRef] I. (2021). Asphalt pavement temperature prediction [15] Ghabchi, R., Singh, D., & Zaman M. (2014). Eval- models: A review. Applied Sciences, 11(9), 37–94. uation of moisture susceptibility of asphalt mixes [CrossRef] containing RAP and different types of aggregates
- Airey, G. (2011). Factors affecting the rheology of and asphalt binders using the surface free energy polymer modified bitumen (PMB). Polymer Modi- method. Construction and Building Materials, 7(3), fied Bitumen 4(7), 238–263. [CrossRef] 479–489. [CrossRef]
- Al-Abdul Wahhab, H., I. Asi, S. Ali, S. Al-Swailmi, & A. Al-Nour. (2004). Pavement stripping in Saudi (2015). Use of neural networks enhanced differen- Arabia: Prediction and prevention. The Journal of tial evolution for backcalculating asphalt concrete Engineering Research, 1(1), 38–45. [CrossRef] viscoelastic properties from falling weight deflec-
- Barzegari, S., Stoffels, S. M., & Solaimanian, M. tometer time series data. Bituminous Mixtures and (2017). Novel application of reclaimed asphalt pave- Pavements, 6(8), 679–686. [CrossRef] ment in construction of new cold mix pavements. [17] Huang, W., Li, B., & Wang, P. (2016). Low tempera- Airfield and Highway Pavements, 90–101. [CrossRef] ture cracking of modified asphalt mixtures as related
- Ali, H. A., & Lopez, A. (1996). Statistical analyses to binder characteristics. Functional Pavement De- of temperature and moisture effects on pavement sign, 7(9), 403–409. [CrossRef] J Sustain Const Mater Technol, Vol. 7, Issue. 3, pp. 221–230, September 2022 229
- Imanbayev, Y. (2017). High temperature transfor- nologies to use sulphur as a pavement construction mation of tar-asphaltene components of bituminous material. International Journal of Pavement Engi- sand bitumen. Juniper Online Journal Material Sci- neering, 22(3), 392–403. [CrossRef] ence, 1(1), 23–45. [CrossRef] [32] Solatifar, N., Abbasghorbani, M., Kavussi, A., & Siv-
- Li, H. (2016). Thermal resistance pavements and ilevičius, H. (2018). Prediction of depth tempera- thermal properties. Pavement Materials for Heat Is- ture of asphalt layers in hot climate area. Journal of land Mitigation, 9(4), 97–133. [CrossRef] Civil Engineering and Management, 24(7), 516–525.
- Kandhal, P., & Koehler, W. (2019). Effect of rheo- [CrossRef] logical properties of asphalts on pavement cracking. [33] Zhang, Y. H., & Wang, F. Z. (2011). Effect of emulsi- Asphalt Rheology: Relationship to Mixture, 9(9), 99– fied asphalt on temperature susceptibility of cement
- Sivapatham, P., & Simmleit N. (2019). Impact of sea- 124–127. [CrossRef] sonal fluctuations and provenience of bitumen on [34] Tari, Y., & Wang, M. (2015). Probabilistic data-driv- lifetime of asphalt pavement. Bituminous Mixtures en assessment of pavement management systems. and Pavements VII, 2(9), 88–92. [CrossRef] Conference: Structural Health Monitoring 2015.
- Kodippily, S., Tighe, S. L., Henning, T. F., & Yea- [CrossRef] man, J. (2016). Evaluating pavement performance [35] Teltayev, B., Kaganovich, Y., & Amirbayev, Y. (2014). through smart monitoring – effects of soil moisture, Evaluation of low temperature stability of bitumen temperature and traffic. Road Materials and Pave- and hot mix asphalt pavement. Asphalt Pavements, ment Design, 19(1), 71–86. [CrossRef] 5(7), 1557–1565. [CrossRef]
- Paul, B., Choudhury Dibakar, R., Rajdeep, R., Abhisek, R., & Sayak, B. (2020). An ecofriendly & Roshani. H. (2013). Rutting performance pre- substitute of asphalt binder – Review. Internation- diction of warm mix asphalt containing reclaimed al Journal of Chemical and Environmental Sciences, asphalt pavements. Road Materials and Pavement 1(3), 64–69. [CrossRef] Design, 15(1), 207–219. [CrossRef]
- Li, H. (2016). Permeable pavements and permeabil- ity. Pavement Materials for Heat Island Mitigation, Prediction of the in-asphalt temperature for road Chapter 4, Elseiver, 79–96. [CrossRef] construction operations. Computing in Civil Engi-
- Khadrawi, A. F., Al-Shyyab, A., & Abo-Qudais, S. A. neering, 3(4) 34–43. [CrossRef] (2020). Transient thermal behavior of hot–mix as- [38] Vujovic, S., Haddad B., Karaky, H., Sebaibi, N., & phalt pavement. Applied Mechanics and Materials, Boutouil, M. (2021). Urban heat island: Causes, con- 1(2), 400–407. [CrossRef] sequences, and mitigation measures with emphasis
- Ravnikar Turk, M., & Tušar, M. (2016). Effect of on reflective and permeable pavements. Civil Engi- ageing on the low temperature properties of bitumen. neering, 2(2), 459–484. [CrossRef] Proceedings of 6th Eurasphalt & Eurobitume Con- [39] Romaniuk, N., Little, L., Arguelles, F. A., Babadagli, gress, 4(8), 34–48. [CrossRef] T., & Ozum, B. (2013). Effect of bitumen viscosity and
- Li, H., Harvey, J. T., Holland T. J., & Kayhanian, M. bitumen-water interfacial tension on the efficiency of (2013). The use of reflective and permeable pave- steam assisted bitumen recovery processes. SPE West- ments as a potential practice for heat island mitiga- ern Regional & AAPG Pacific Section Meeting 2013 tion and stormwater management. Environmental Joint Technical Conference. Research Letters, 8(1), 015-023. [CrossRef] [40] Chintakunta Reddy, S. (2016). Sensitivity of thermal
- Qian, G., Zheng, J., & Wang, Q. (2008). Calculating properties of pavement materials using mechanis- thermal stresses of asphalt pavement in environ- tic-empirical pavement design guide [Unpublished mental conditions. Pavements and Materials, 4(6), Master Thesis]. Iowa State University. 234–241. [CrossRef] [41] Díaz-Sánchez, M. A., &. Timm, D. H. (2015). Influ-
- American Association of State Highway and Trans- ence of sustainable technologies on ın-place thermal portation Officials. (1993). AASHTO Guide for De- properties of asphalt pavements. Airfield and High- sign of Pavement Structures. American Association way Pavements, 6(8), 536–547. [CrossRef] of State Highway and Transportation Officials. [42] Islam, R., Mannan, A., Rahman, T., & Tarefder, A.
- Tiza, M. (2021). Evaluation of thermal effects on (2014). Simplified thermal stress model to predict slag cement concrete’s strength properties. Journal low temperature cracks in flexible pavement. Pave- of Cement Based Composites, 3(3), 11–15. [CrossRef] ment Materials, Structures, and Performance, 6(8),
- Sakib, N., Bhasin, A., Islam, M. K., Khan, K., & 234–250. [CrossRef] Khan, M.I. (2019). A review of the evolution of tech- [43] Hui, L. (2016). Pavement thermal modeling. Pave- 230 J Sustain Const Mater Technol, Vol. 7, Issue. 3, pp. 221–230, September 2022 ment Materials for Heat Island Mitigation, 5(5), 239– using a two-dimensional, transient finite-difference
- Tiza, M., Mogbo, N., Duweni, E., & Asawa, I. (2020). 17(4), 465–475. [CrossRef] Recycled asphalt pavement: A systematic literature [52] Yuan, H., Han, D., & Zhang, W. (2015). The effect of review. Journal of Modern Technology and Engineer- pressure and temperature on bitumen saturated car- ing 5(3), 242–254. bonate. SEG Technical Program Expanded Abstracts,
- Blab, R. (2018). Multiscale modeling for perfor- 5(6), 34-40. [CrossRef] mance prediction of asphaltic materials. Advances [53] McBee, W. C., Sullivan, T. A., & Saylak, D. (2018). Re- in Materials and Pavement Performance Prediction, cycling old asphaltic pavement with sulfur. Recycling 5(7), 5–15. [CrossRef] of Bituminous Pavements, 5(9), 123–129. [CrossRef]
- Han, J., Shaopeng, W., Zhiyi, H., Dehong, Z., & Fu- jian, L. (2012). Research on low temperature rhe- ing on the low temperature properties of bitumen. ological behavior of aging resistant bitumen and Proceedings of 6th Eurasphalt & Eurobitume Con- mixture. Sustainable Construction Materials, 6(9), gress, 4(5), 34–50. [CrossRef] Conference Paper. [CrossRef] [55] National Precast Concrete Association. (2018). Re-
- Kim, S-M., & Nam, J. H. (2010). Measurements and ducing shrinkage cracking. National Precast Con- experimental analysis of temperature variations in crete Association. portland cement concrete pavement systems. Road [56] Xu, W., Jimenez-Bescos, C., Pantuna, C. A. J., Calau- Materials and Pavement Design, 11(3), 745–771. tit, J., & Wu, Y. A coupled modelling method for the [CrossRef] evaluation of the ımpact of pavement solar collector
- Marciales, A., & Babadagli, T. (2014). Selection of on urban air temperature and thermal collection. Optimal solvent type for high temperature solvent Future Cities and Environment, 7(1), 1–16. [CrossRef] applications in heavy-oil and bitumen recovery. En- [57] Choi, G. Y., Kim, H. S., Kim, H., & Lee, J. S. How ergy Fuels, 10(2), 345–365. [CrossRef] do pavement and planting strategies affect microcli-
- Wu, S., Feng, Y., & Wong, A. (2004). Selected rheo- mate conditions and thermal comfort in apartment logical properties of tall oil pitch binder for asphaltic complexes? International Journal of Climate Change road pavement construction. International Journal Strategies and Management, 13(2), 97–119. [CrossRef] of Pavement Engineering 5(3), 175–182. [CrossRef] [58] McDonald, T., & McDonald, P. (2010). Guide to
- Zaghloul, S., & Saeed, N. (2017). The use of falling pavement maintenance. iUniverse. weight Deflectometer in asphalt pavement construc- [59] Wambold, J. C. (1989). Pavement friction mea- tion quality control. Quality Management of Hot Mix surement normalized for operational, seasonal, and Asphalt, 5(9), 66–76. [CrossRef] weather effects. Federal Highway Administration
- Yavuzturk, C., Ksaibati, K., & Chiasson, A. D. (2005). and Pennsylvania Transportation Institute Assessment of temperature fluctuations in asphalt [60] Pavement Interactive. (Dec 17, 2020). Pavement in- pavements due to thermal environmental conditions teractive. https://pavementinteractive.org/
- Vasenev, A., Hartmann, T., & Dorée, A. G. (2012).
- Ravnikar Turk, M., & Tušar, M. (2016). Effect of age-
Share and Cite
Tiza, M.T.; JIRGBA, K.; SANI, H.A.; SESUGH, A.T. Effect of Thermal Variances on Flexible Pavements. Journal of Sustainable Construction Materials and Technologies 2022, Vol. 7, pp. 4. https://doi.org/10.47481/jscmt.1136848
Export:

